The right stone and finish for each spot
Natural stone is what you put where tiles would chip or crack. The work is mostly in choosing the right stone and finish for the spot. Polished granite inside, a rough or flamed surface outside where it gets wet, and Kota or sandstone where you want a plain, hard-wearing floor.
What this covers
- Granite flooring, polished or with a rough anti-skid finish
- Kota stone and sandstone for verandas and parking
- Window sills and door frames in granite
- Compound paths, steps and garden edging
- Edge moulding and polishing done on site
- Slate and stone for outdoor seating and planters
How the job runs
-
Pick the stone
We suggest the stone and finish for each spot, inside and outside, and the thickness it needs.
-
Prepare the base
Outdoor areas get a proper slope so rainwater runs off and does not sit under the stone.
-
Cut and lay
Slabs are cut on site to fit and laid on a full bed, with edges lined up straight.
-
Finish the edges
Exposed edges are moulded and polished, and joints are filled and cleaned.
Common questions
Kota, sandstone or granite with a flamed or rough finish. Polished granite looks good outside but gets slippery when wet, so we avoid it on paths and porches.
The top surface usually comes polished from the factory. We polish the cut edges, moulding and any joints on site so everything matches.
Yes. They are measured on site, cut to size and fixed with the edges finished. They are priced per running foot.
