Marble Work

Italian and Indian marble laid, matched and polished on site. Old marble floors brought back with grinding and re-polishing.

Marble Work

Marble laid, matched and polished on site

Marble is a natural stone, so no two slabs are the same. Before laying, we spread the slabs out and arrange them so the veins flow from one to the next, and so the best pieces end up where people will actually look. Then the floor is cured, ground flat and polished on site.

What this covers

  • Italian marble: Statuario, Carrara, Botticino and similar
  • Indian marble: Makrana, Rajnagar, Ambaji, Katni and others
  • Vein matching and book-matched layouts
  • Borders, inlay patterns and medallions
  • Grinding, crack filling and diamond polishing
  • Re-polishing of old, scratched or dull marble floors

How the job runs

  1. Sort the slabs

    Slabs are laid out, checked for cracks and arranged so the colour and veins match across the room.

  2. Lay on a firm bed

    Each slab is laid on a full mortar bed and levelled, with tight joints that will polish clean.

  3. Cure

    The floor is left to set. Rushing polishing at this stage is how floors end up uneven.

  4. Grind and polish

    We grind the lips flat, fill pores and fine cracks, then polish in stages up to a mirror finish.

Marble Work
Marble Work

Common questions

Italian marble has a finer look but is softer, stains more easily and needs sealing. Indian marble like Makrana is harder and usually costs less. If the area gets heavy use, we will say so honestly.

Yes. We grind out scratches and dull patches, fill small cracks and re-polish. A floor that looks finished can usually be brought back without replacing it.

Light walking is usually fine within a day or two of laying, but keep heavy furniture off until polishing is done. We give you clear dates for your site.